发布时间：2021-10-26 浏览量：次
|
所在部门(必填)机电工程学院 （系部）车辆工程系 (研究所) 智能制造与机器人技术研究所 e-mail：pengkang@wzu.edu.cn |
研究方向 |
焊接、修复及增材制造 |
基本介绍 |
彭康，男，陕西咸阳人。2010年毕业于西北工业大学材料学院，获工学学士学位，2012年毕业与哈尔滨工业大学材料学院，获工学硕士学位，2018年毕业于哈尔滨工业大学材料学院，获工学博士学位。先后承担或参与中核集团领创科研项目、江苏核电及秦山核电等单位焊接与修复横向课题、大型先进压水堆核电站重大专项中国先进核电标准体系研究子课题、船厂高强钢焊接课题等，发表sci论文5篇。 |
主要工作经历 |
2012.08-2013.11 西部超导材料科技股份有限公司； 2018.07-2021.06 中国核动力研究设计院； 2021.07至今 温州大学机电工程学院 |
学术成果 |
1.kang peng, chunli yang, sanbao lin, et al. effect of arc distance on haz thermal cycles and microstructural evolution 10crni3mov steel. the international journal of advanced manufacturing technology. 2017, 90(9-12): 3387-3395. 2.kang peng, chunli yang, sanbao lin, et al. thermal cycles and its effect on haz microstructure and mechanical properties of 10crni3mov steel in double-sided double arc welding. the international journal of advanced manufacturing technology. 2017, 93(1-4): 967-974. 3. kang peng, chunli yang, chenglei fan, et al. microstructure and mechanical properties of simulated unaltered coarse grained heat affected zones of 10crni3mov steel by double-sided double arc welding. journal of materials processing technology. 2018, 251: 225-231. 4.kang peng, chunli yang, chenglei fan, et al. in situ observation and electron backscattered diffraction analysis of granular bainite in simulated heat-affected zone of high-strength low-alloy steel. science and technology of welding and joining. 2018, 25(3): 158-163. 5.kang peng, chunli yang, chenglei fan, et al. thermal process, microstructure and mechanical properties near weld toe in double-sided double gas tungsten arc backing welding joint of 10crni3mov steel. the international journal of advanced manufacturing technology. 2018, 96(1-4): 677-684. |
